How to Do Proper Tile and Grout Cleaning

Tiles and grout are commonly found in kitchens and bathrooms. And because these two parts of the house are the most used areas in every home, the grout and tiles tend to get dirty faster than any other spots. If you need help in cleaning them, you have to call the experts. That’s the fastest, surest, and simplest way of getting things done.  

Grout Cleaning

Of course, you can always handle the job yourself. If you’re up to the challenge of washing and scrubbing your bathroom and kitchen tiles, below are guidelines on how you can properly clean them. Just keep in mind that you’re going to need tools, materials, and a lot of patience to get things right.  

  1. Do a quick inspection of the tiled floor and walls. 

There will always be areas that are more stained than others. You have to take note of those spots because those are the areas that will require more time and attention.  

  1. Prepare the entire area. 

Once you know where to start, you have to begin to prepare the whole area. Remove all debris that could give you issues while working. You may have to move appliances, furniture, and light fixtures around if necessary.  

  1. Pre-treat the floors.

For this step, you’ll need a pre-spray with a high pH alkaline level. This substance helps greatly in setting the pores and loosening up all dirt and stains. It will make the next steps a whole lot easier for you.  

  1. Start hand scrubbing.

Clean the grout lines through agitation or hand scrubbing. Doing so will further loosen the dirt that the pre-treatment solution started to cure. It will also spread the chemical on the other areas for faster cleaning.  

  1. Use a steam extraction device.

This is one of the special tools needed to effectively clean tiles and grout. A steam extraction device is a rotary machine that employs the hot water pressure extraction method to effectively clean and rinse the area. It mainly eliminates dirt and grime buildup, while eradicating microorganisms in the process.  

  1. Apply a pH solution.

This solution will further clean up all the difficult stains in the tiles and grout. It will re-extract them so there will be absolutely no more stain on your floors and walls. At this point, you’re practically done cleaning the floor.  

  1. Apply a clear seal protectant. 

The protectant will prolong the life of your tiles and grout. It will protect your floors from getting dirty as it adds a protective layer to prevent grime from seeping into the pores. Because of the seal protectant, routine mopping will be enough to maintain the floor’s overall cleanliness and shine.  

  1. Return everything back to its proper order.

Now that you’re done cleaning the tile and grout, you should be ready to put back all the appliances and furniture you moved back to its original location. This also means that you’re finally done with the task.  

For a highly professional tile and grout cleaning service, better seek out qualified service providers in your area. They have the tools, expertise, and experience to get tiled floors and grout cleaned in no time. Soliciting their services may require nominal investment from you, but everything will be worth it if you get a smooth, impeccable and hassle-free experience.  

 

Read More